1560-00-144-6544 DOOR,ACCESS,AIRCRAFT Index 5315-00-144-6547 PIN,QUICK RELEASE

National Stock Number:
5306-00-144-6546

Federal Supply Class:
5306

National Item Identification Number:
001446546

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
A51G10619-1126512NORTHROP GRUMMAN SYSTEMS CORPORATION
A51G10619-1161174NORTHROP GRUMMAN SYSTEMS CORPORATION
A51G10619-1179RG9NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER6.020 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH6.220 INCHES NOMINAL
FEATURES PROVIDEDFINISHED HEAD
GRIP DIAMETER0.4350 INCHES MINIMUM AND 0.4356 INCHES MAXIMUM
GRIP LENGTH5.720 INCHES NOMINAL
HARDNESS RATING53.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.207 INCHES NOMINAL
HEAD STYLEHEXAGON
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH280000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-8837 TYPE 2 CL 1 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.500 INCHES NOMINAL
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH20


Click here to Register for Free 30-day Trial