|
|
National Stock Number: 5306-00-144-4043
Federal Supply Class: 5306
National Item Identification Number: 001444043
Description: BOLT,CLOSE TOLERANCE
Detail: An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
AN175H12A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
FASTENER LENGTH | 1.328 INCHES MINIMUM AND 1.375 INCHES MAXIMUM | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM | GRIP LENGTH | 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | HEAD STYLE | HEXAGON | HOLE DIAMETER | 0.070 INCHES NOMINAL | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE | HOLE QUANTITY | 1 | HOLE TYPE | DRILLED | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.312 INCHES | WIDTH BETWEEN FLATS | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.579 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNF | THREAD QUANTITY PER INCH | 24 |
|
|