5306-00-144-3973, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-144-3973

Federal Supply Class:
5306

National Item Identification Number:
001443973

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

AN178-20

88044

AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.905 INCHES MINIMUM AND 1.937 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	2.078 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
GRIP DIAMETER	0.4986 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM
GRIP LENGTH	1.296 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.750 INCHES MINIMUM AND 0.895 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial