5306-00-142-4932, BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-00-142-4932

Federal Supply Class:
5306

National Item Identification Number:
001424932

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

2-121-026-04

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	3.010 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	1.720 INCHES MINIMUM AND 1.740 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	4
FASTENER LENGTH	3.460 INCHES MINIMUM AND 3.480 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.311 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD	0.253 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
HARDNESS RATING	37.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	-3603,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER	0.312 INCHES
PRECIOUS MATERIAL	SILVER
SECOND DIAMETER FROM HEAD	0.253 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	SILVER OVERALL
TEST DATA DOCUMENT	+6808-P-191547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THIRD DIAMETER FROM HEAD	0.311 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial