|
|
|
National Stock Number:
5306-00-139-8056
Federal Supply Class:
5306
National Item Identification Number:
001398056
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 11701A07D106 | 59563 | REID PRODUCTS INC. | | 68485-7-106 | 56878 | SPS TECHNOLOGIES, LLC | | 68485-7-106 | 80539 | SPS TECHNOLOGIES, LLC | | AIC2264A07D106 | 06725 | SPS TECHNOLOGIES, LLC | | BM3210-7A106D | 17446 | HUCK INTERNATIONAL, INC | | BM3210-7A106D | 97928 | HUCK INTL INC | | PBF1042A7D106 | 27624 | SPS TECHNOLOGIES LLC | | STSBG001A07D106 | 56878 | SPS TECHNOLOGIES, LLC | | STSBG001A07D106 | 98897 | LOCKHEED MARTIN CORP | | VAL23602-7DS106 | 06710 | VALLEY-TODECO, INC. | | VS2979A07D106 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 6.979 INCHES MINIMUM AND 7.011 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 7.104 INCHES MINIMUM AND 7.151 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | GRIP LENGTH | 6.625 INCHES NOMINAL | | HEAD HEIGHT | 0.257 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 156000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | WIDTH BETWEEN FLATS | 0.678 INCHES MINIMUM AND 0.689 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|