|
|
|
National Stock Number:
5305-01-587-1305
Federal Supply Class:
5305
National Item Identification Number:
015871305
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS7702-16 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| FASTENER LENGTH | 1.323 INCHES NOMINAL | | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | GRIP LENGTH | 1.000 INCHES NOMINAL | | HEAD DIAMETER | 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD HEIGHT | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | HEAD STYLE | PAN | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE III | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-562 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | SINGLE SHEAR STRENGTH | 95000 POUNDS PER SQUARE INCH | | POINT STYLE | FLAT | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.323 INCHES NOMINAL |
|
|