5305-01-545-8238, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-545-8238

Federal Supply Class:
5305

National Item Identification Number:
015458238

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1123E3H

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
GRIP DIAMETER	0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM
GRIP LENGTH	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HARDNESS RATING	24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT	0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	DRILLED HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial