|
|
|
National Stock Number:
5305-01-530-0706
Federal Supply Class:
5305
National Item Identification Number:
015300706
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AIC985-4-8R | 06725 | SPS TECHNOLOGIES, LLC | | C7985-4-8R | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.825 INCHES MINIMUM AND 0.852 INCHES MAXIMUM | | GRIP DIAMETER | 0.2637 INCHES MINIMUM AND 0.2643 INCHES MAXIMUM | | GRIP LENGTH | 0.500 INCHES NOMINAL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|