|
|
|
National Stock Number:
5305-01-520-4446
Federal Supply Class:
5305
National Item Identification Number:
015204446
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 93926-5-20 | 56878 | SPS TECHNOLOGIES, LLC | | 93926-5-20 | 80539 | SPS TECHNOLOGIES, LLC | | AIC618-5-20 | 06725 | SPS TECHNOLOGIES, LLC | | C20645-5-20 | 81755 | LOCKHEED MARTIN CORPORATION | | GS1009-5-20 | 1EM77 | B & B SPECIALTIES INC | | SF116-5-20 | 0KZ60 | JENSEN ROLF AND ASSOCIATES | | VT10021-5-20 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM | | GRIP DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | GRIP LENGTH | 0.734 INCHES MINIMUM AND 0.764 INCHES MAXIMUM | | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | CDA000 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-LOW HD, SKIRT HD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|