5305-01-516-7344, SCREW,EXTERNALLY RELIEVED BODY

5961-01-516-7345 SEMICONDUCTOR DEVICE,DIODE

National Stock Number:
5305-01-516-7344

Federal Supply Class:
5305

National Item Identification Number:
015167344

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

H25-0002-412	14304	L3HARRIS TECHNOLOGIES, INC.
H99-0006-018	14304	L3HARRIS TECHNOLOGIES, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.570 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.750 INCHES NOMINAL
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.750 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.078 INCHES NOMINAL
HEAD DIAMETER	0.191 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
SPECIAL FEATURES	ALTERED ITEM MADE FROM MS24693
SECOND DIAMETER FROM HEAD	0.180 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-14072, TYPE E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD LENGTH	0.180 INCHES NOMINAL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial