|
|
National Stock Number: 5305-01-515-9063
Federal Supply Class: 5305
National Item Identification Number: 015159063
Description: SCREW,EXTERNALLY RELIEVED BODY
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
08761 | 1H855 | IVES EQUIPMENT CORPORATION | 08761 | 98991 | WORCESTER CONTROLS CORP P O BOX 2609 COOKEVILLE TN 385022609 |
|
Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.500 INCHES NOMINAL | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | FASTENER LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM | FIRST DIAMETER FROM HEAD | 0.179 INCHES MINIMUM AND 0.189 INCHES MAXIMUM | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | HEAD STYLE | HEXAGON | INTERNAL DRIVE STYLE | SLOT | MATERIAL | STEEL CORROSION RESISTING OVERALL | NOMINAL THREAD DIAMETER | 0.250 INCHES | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | THREAD QUANTITY PER INCH | 20 | THREAD SERIES DESIGNATOR | UNC |
|
|