5305-01-355-6951 SCREW,CLOSE TOLERANCE Index 4710-01-355-6953 PIPE,METALLIC

National Stock Number:
5305-01-355-6952

Federal Supply Class:
5305

National Item Identification Number:
013556952

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
124379-8D2880539SPS TECHNOLOGIES, LLC
GB510FG8D2826512NORTHROP GRUMMAN SYSTEMS CORPORATION
PBF1475-8D2827624SPS TECHNOLOGIES LLC
VCL0009-8D2806710VALLEY-TODECO, INC.


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.100 INCHES MINIMUM AND 2.152 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM
GRIP DIAMETER0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH1.740 INCHES MINIMUM
HEAD DIAMETER0.951 INCHES MINIMUM AND 1.014 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLETORQUE-SET RIBBED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.735 INCHES NOMINAL
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH20


Click here to Register for Free 30-day Trial