|
|
|
National Stock Number:
5305-01-352-1217
Federal Supply Class:
5305
National Item Identification Number:
013521217
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 536735-61 | 96214 | RAYTHEON COMPANY | | CA28102-4B-9HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CS5070-61 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FT1380B-61 | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| COLOR | BLACK OVERALL | | FASTENER LENGTH | 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM | | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL ACCOMMODATED THICKNESS | 0.070 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L SECONDARY WASHERSTEEL COMP 302 PRIMARY WASHERSTEEL COMP 302 SPRINGSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFFSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L FASTENER | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH ACROSS FLATS | 0.187 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|