5305-01-350-4183, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-350-4183

Federal Supply Class:
5305

National Item Identification Number:
013504183

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

124380-4-13CD	80539	SPS TECHNOLOGIES, LLC
GB510FH4D13P	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
PBF1476-4D13P	27624	SPS TECHNOLOGIES LLC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.980 INCHES NOMINAL FIRST HOLE
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.174 INCHES MINIMUM AND 1.204 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER	0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	COBALT COMP MP-35-N OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.377 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial