|
|
|
National Stock Number:
5305-01-349-4901
Federal Supply Class:
5305
National Item Identification Number:
013494901
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 260421-8 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.136 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.880 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.570 INCHES NOMINAL | | HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.310 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|