|
|
|
National Stock Number:
5305-01-348-3562
Federal Supply Class:
5305
National Item Identification Number:
013483562
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 60511662-1 | 34860 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | CA29041-04-45HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| FASTENER LENGTH | 0.792 INCHES NOMINAL | | HEAD DIAMETER | 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SECONDARY WASHERSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L PRIMARY WASHERSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SPRINGSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFFSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L FASTENER | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | WIDTH ACROSS FLATS | 0.078 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD LENGTH | 0.141 INCHES MINIMUM AND 0.186 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 40 |
|
|