5305-01-345-5343 SCREW,CLOSE TOLERANCE Index 5307-01-345-5345 STUD,CONTINUOUS THREAD

National Stock Number:
5305-01-345-5344

Federal Supply Class:
5305

National Item Identification Number:
013455344

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS1204-38D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.550 INCHES MINIMUM AND 2.600 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH2.676 INCHES MINIMUM AND 2.706 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIALSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS1204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial