|
|
|
National Stock Number:
5305-01-342-5174
Federal Supply Class:
5305
National Item Identification Number:
013425174
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 5305013425174 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51849-74C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | HEAD HEIGHT | 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SCREW MATERIAL | COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230 OR COPPER ALLOY 377 OR COPPER ALLOY 360 OR COPPER ALLOY 353 OR COPPER ALLOY 270 OR COPPER ALLOY 274 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 757 OR COPPER ALLOY 764 OR COPPER ALLOY 770 OR COPPER ALLOY 240 OR COPPER ALLOY 342 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | PASSIVATE | | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.387 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 24 |
|
|