|
|
|
National Stock Number:
5305-01-270-3056
Federal Supply Class:
5305
National Item Identification Number:
012703056
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121558-4-A8W | 80539 | SPS TECHNOLOGIES, LLC | | 5305PL0784017 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1941832 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AIC985A4-8 | 06725 | SPS TECHNOLOGIES, LLC | | AIC985B4-8 | 06725 | SPS TECHNOLOGIES, LLC | | C7985A4-8 | 81755 | LOCKHEED MARTIN CORPORATION | | H185A4-8 | 17446 | HUCK INTERNATIONAL, INC | | H185A4-8 | 97928 | HUCK INTL INC | | PBF1166A4-8 | 27624 | SPS TECHNOLOGIES LLC | | VT1694W4-8 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM | | FEATURES PROVIDED | DRY FILM LUBRICANT | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|