5305-01-265-8955, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-265-8955

Federal Supply Class:
5305

National Item Identification Number:
012658955

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

123256-5R2512	80539	SPS TECHNOLOGIES, LLC
AS303-25-12	84256	AVIBANK MFG., INC.
LE111-0044-2512	43999	THE BOEING COMPANY

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.123 INCHES MINIMUM AND 1.138 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM
GRIP DIAMETER	0.3108 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
GRIP LENGTH	0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS5644 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	STEEL COMP 630 OR STEEL COMP 631 OR STEEL COMP 440C LOCKING FEATURE
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 FASTENER
NOMINAL THREAD DIAMETER	0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	INTERNAL DRIVE RIBBED
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT	PASSIVATE LOCKING FEATURE
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.228 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial