|
|
|
National Stock Number:
5305-01-264-1479
Federal Supply Class:
5305
National Item Identification Number:
012641479
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| LD111-0047-0307 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.754 INCHES MINIMUM AND 0.784 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | HEAD DIAMETER | 0.266 INCHES MINIMUM AND 0.303 INCHES MAXIMUM | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.306 INCHES MINIMUM AND 0.356 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF |
|
|