5305-01-262-7886, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-262-7886

Federal Supply Class:
5305

National Item Identification Number:
012627886

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

MS3369B-1027

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	2.605 INCHES MINIMUM AND 2.625 INCHES MAXIMUM
GRIP DIAMETER	0.6236 INCHES MINIMUM AND 0.6241 INCHES MAXIMUM
GRIP LENGTH	1.688 INCHES MINIMUM AND 1.704 INCHES MAXIMUM
HARDNESS RATING	50.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM LOCKING FEATURE
HEAD HEIGHT	0.313 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD STYLE	CROWNED HEXAGON
INTERNAL DRIVE STYLE	SLOT
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5673 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	STEEL COMP XM-13 FASTENER
MATERIAL	STEEL CORROSION RESISTING LOCKING FEATURE
MATERIAL	STEEL COMP 631 OR STEEL COMP 302 SPRING
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.596 INCHES MINIMUM AND 0.647 INCHES MAXIMUM
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial