5905-01-219-9597 RESISTOR NETWORK,FIXED,FILM Index 5305-01-219-9599 SCREW,CAP,SOCKET HEAD

National Stock Number:
5305-01-219-9598

Federal Supply Class:
5305

National Item Identification Number:
012199598

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
251024510001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.208 INCHES MINIMUM AND 0.212 INCHES MAXIMUM
HEAD HEIGHT0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD STYLEHEXAGON
INTERNAL DRIVE STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 302 AND STEEL COMP 303 AND STEEL COMP 304 AND STEEL COMP 305 AND STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER0.3125 INCHES
SPECIAL FEATURESSCREW END ROUNDED TO 5/32 R AND THE ITEM IS ALTERED FROM MS16995-67
WIDTH ACROSS FLATS0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us