|
|
|
National Stock Number:
5305-01-216-4502
Federal Supply Class:
5305
National Item Identification Number:
012164502
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 12009312 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.330 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 4.000 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 4.000 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.625 INCHES NOMINAL | | HEAD HEIGHT | 0.370 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SECOND DIAMETER FROM HEAD | 0.490 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.870 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.330 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 11 | | THREAD SERIES DESIGNATOR | UNC |
|
|