5305-01-214-7875, SCREW,EXTERNALLY RELIEVED BODY

5305-01-214-7874 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-214-7875

Federal Supply Class:
5305

National Item Identification Number:
012147875

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

307C8050-04-020	86360	GE AVIATION SYSTEMS LLC DBA GE AVIATION DIV INFORMATION SYSTEMS - GERMANTOWN
6101-SS-0440-6B	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6101-SS-0440-6B	1YGB8	CAREY MANUFACTURING CO, INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
HEAD DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
HEAD HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A 581 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 203EZ OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 303SE OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 430F OR STEEL COMP 430FSE OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
POINT LENGTH	0.078 INCHES NOMINAL
POINT STYLE	CONE
POINT CHAMFER ANGLE	85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
POINT DIAMETER	0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SPECIAL FEATURES	COLOR BLACK; STRAIGHT KNURL
SURFACE TREATMENT	OXIDE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial