5305-01-211-5010, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-211-5010

Federal Supply Class:
5305

National Item Identification Number:
012115010

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

586R634H01	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
586R634H01	97942	NORTHROP GRUMMAN SYSTEMS CORPORATION
FT1313	58794	FASTENER TECHNOLOGY CORP

Techincal Specification:

FASTENER LENGTH	1.080 INCHES MINIMUM AND 1.110 INCHES MAXIMUM
HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
HEAD STYLE	HEXAGON
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL ACCOMMODATED THICKNESS	0.125 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIAL	IRON ALLOY 660 FASTENER
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 SECONDARY WASHER
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 PRIMARY WASHER
MATERIAL	STEEL COMP 302 SPRING
MATERIAL	STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFF
MINIMUM TENSILE STRENGTH	130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	INTERNAL THREADS IN SLEEVE SECTION; 0.250-28 UNF-2B
WIDTH ACROSS FLATS	0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.312 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial