DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.434 INCHES MINIMUM AND 1.474 INCHES MAXIMUM FIRST HOLE |
COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
FASTENER LENGTH | 1.564 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |
GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
HEAD DIAMETER | 0.704 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
HEAD STYLE | FLAT COUNTERSUNK |
INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
MATERIAL | IRON ALLOY 660 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.375 INCHES |
SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE |
SPECIFICATION/STANDARD DATA | 80205-NAS1156 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
SURFACE FINISH | 32.0 MICROINCHES GRIP |
SURFACE FINISH | 32.0 MICROINCHES THREADS |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | PASSIVATE OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 24 |