5305-01-210-7420 SCREW,CLOSE TOLERANCE Index 5305-01-210-7422 SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-210-7421

Federal Supply Class:
5305

National Item Identification Number:
012107421

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.


Manufacturer Information:
5033474-00357946US ARMY COMBAT SURVEILLANCE AND TARGET ACQUISITION LABORATORY
CA28102-08-6P29372HOWMET GLOBAL FASTENING SYSTEMS INC.


Techincal Specification:
FASTENER LENGTH0.984 INCHES MINIMUM AND 1.097 INCHES MAXIMUM
HEAD DIAMETER0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD HEIGHT0.133 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
HEAD STYLEFILLISTER
INTERNAL DRIVE STYLECROSS RECESS TYPE II
MATERIAL ACCOMMODATED THICKNESS0.097 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIALSTEEL COMP 302 SECONDARY WASHER
MATERIALSTEEL COMP 302 SPRING
THREAD LENGTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNC
MATERIALSTEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 303SE FASTENER
MATERIALSTEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 303SE PRIMARY WASHER
MATERIALSTEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 303SE STAND-OFF
PROPRIETARY CHARACTERISTICSPACS
NOMINAL THREAD DIAMETER0.164 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND


Click here to Register for Free 30-day Trial