5305-01-210-7393, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-210-7393

Federal Supply Class:
5305

National Item Identification Number:
012107393

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

003-008835-001

26916

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 410 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
MINIMUM TENSILE STRENGTH	130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SECOND DIAMETER FROM HEAD	0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THIRD DIAMETER FROM HEAD	0.096 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
THREAD LENGTH	0.218 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.172 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	2.503 INCHES MINIMUM AND 2.550 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	3.218 INCHES MINIMUM AND 3.282 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	3.468 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.180 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.270 INCHES NOMINAL
HEAD HEIGHT	0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1

Click here to Register for Free 30-day Trial