5306-01-210-3853 BOLT,CLOSE TOLERANCE Index 5305-01-210-3855 SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-210-3854

Federal Supply Class:
5305

National Item Identification Number:
012103854

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
11883-3DL359563REID PRODUCTS INC.
3M926-3DL3007R1TWIST TITE MFG, INC
3M926-3DL306710VALLEY-TODECO, INC.
3M926-3DL30ZC92HEARTLAND PRECISION FASTENERS INC
3M926-3DL31VSL7HOUSTON PRECISION FASTENERS I LP
3M926-3DL358998FASTENER INNOVATION TECHNOLOGY, INC.
3M926-3DL376301THE BOEING COMPANY
HT4068-3D356878SPS TECHNOLOGIES, LLC
HT4068-3D3A06725SPS TECHNOLOGIES, LLC
HT4068-3D3A06950HOWMET GLOBAL FASTENING SYSTEMS INC
HT4068-3D3A17446HUCK INTERNATIONAL, INC
HT4068-3D3A27624SPS TECHNOLOGIES LLC
HT4068-3D3A56878SPS TECHNOLOGIES, LLC
HT4068-3D3A73197HI-SHEAR CORPORATION
HT4068-3D3A80539SPS TECHNOLOGIES, LLC
HT4068-3D3A92215HOWMET GLOBAL FASTENING SYSTEMS INC
HT4068-3D3A97928HUCK INTL INC
HT4068-3D3AK5673SPS TECHNOLOGIES LTD TJ BROOKS DIVISION
HT4068-3D3AL4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
WC4068-3D360516WEST COAST AEROSPACE, INC.


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.458 INCHES MINIMUM AND 0.498 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD HEIGHT0.013 INCHES MAXIMUM
HEAD STYLEFILLISTER COUNTERSUNK
INTERNAL DRIVE STYLEHIGH-TORQUE
MATERIAL DOCUMENT AND CLASSIFICATION23-112,FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTALUMINUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial