5305-01-209-7109, SCREW,EXTERNALLY RELIEVED BODY

5305-01-209-7108 SCREW,EXTERNALLYRELIEVEDBODY

5305-01-209-7110 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-209-7109

Federal Supply Class:
5305

National Item Identification Number:
012097109

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

810AS2215-2

30003

NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.254 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
HEAD HEIGHT	0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL	STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 303SE OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 420F OR STEEL COMP 420FSE OR STEEL COMP 440F OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
POINT LENGTH	0.313 INCHES NOMINAL
POINT STYLE	CONE
POINT CHAMFER ANGLE	90.0 DEGREES NOMINAL
POINT DIAMETER	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TYPE 4 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial