5306-01-200-5736 BOLT,SHEAR Index 5910-01-200-5740 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5305-01-200-5737

Federal Supply Class:
5305

National Item Identification Number:
012005737

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.


Manufacturer Information:
FF-S-8581348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-14296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.558 INCHES MINIMUM AND 2.672 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM
HARDNESS RATING235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 410 OR STEEL COMP 416 OR STEEL COMP 430 OVERALL
MINIMUM YIELD STRENGTH40000 POUNDS PER SQUARE INCH
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.318 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH11


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us