|
|
|
National Stock Number:
5305-01-199-1335
Federal Supply Class:
5305
National Item Identification Number:
011991335
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 1067061-3-8 | 80539 | SPS TECHNOLOGIES, LLC | | 106706H3-8 | 56878 | SPS TECHNOLOGIES, LLC | | 106706T-3-8 | 80539 | SPS TECHNOLOGIES, LLC | | 1202-3-8 | 27624 | SPS TECHNOLOGIES LLC | | GB510BC3-8 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510CE3-8 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510N3A8 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HR204-3-8 | 73197 | HI-SHEAR CORPORATION | | HR204JK-3-8 | 73197 | HI-SHEAR CORPORATION | | HR204JK-3-8 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | PBF1202-3-8 | 27624 | SPS TECHNOLOGIES LLC | | SC1779-3-8 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SCD1779-3-8 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SFH22-3A8 | 50392 | SPS TECHNOLOGIES INC | | SFH22-3A8 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.818 INCHES MINIMUM AND 0.865 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY2 CL2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.308 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|