5305-01-167-2405 SCREW,CLOSE TOLERANCE Index 5305-01-167-2407 SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-167-2406

Federal Supply Class:
5305

National Item Identification Number:
011672406

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
10115509A486GNIMIKKEISTOKESKUS NCB FINLAND
110179-5-21AS56878SPS TECHNOLOGIES, LLC
110179-5-21AS80539SPS TECHNOLOGIES, LLC
BM33024V5-21U17446HUCK INTERNATIONAL, INC
BM33024V5-21U97928HUCK INTL INC
HT271A5-2173197HI-SHEAR CORPORATION
HT8137-5-21AS06950HOWMET GLOBAL FASTENING SYSTEMS INC
HT8137-5-21AS92215HOWMET GLOBAL FASTENING SYSTEMS INC
ST3M430V5-21AS007R1TWIST TITE MFG, INC
ST3M430V5-21AS56878SPS TECHNOLOGIES, LLC
ST3M430V5-21AS73197HI-SHEAR CORPORATION
ST3M430V5-21AS76301THE BOEING COMPANY
ST3M430V5-21AS92215HOWMET GLOBAL FASTENING SYSTEMS INC
ST3M430V5-21ASL4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH1.827 INCHES MINIMUM AND 1.874 INCHES MAXIMUM
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER0.602 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT0.0878 INCHES MINIMUM AND 0.0899 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLEHIGH-TORQUE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY UNS R54520 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SPECIAL FEATURESFURNISHED WITH O-RING
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial