|
|
|
National Stock Number:
5305-01-167-1091
Federal Supply Class:
5305
National Item Identification Number:
011671091
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 10115507 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 642AS1623-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | HT4053-5-3A | 17446 | HUCK INTERNATIONAL, INC | | HT4053-5-3A | 58996 | BIKOR CORP | | HT4053-5-3A | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | HT4053-5-3A | 60516 | WEST COAST AEROSPACE, INC. | | HT4053-5-3A | 73197 | HI-SHEAR CORPORATION | | HT4053-5-3A | 80539 | SPS TECHNOLOGIES, LLC | | HT4053-5-3A | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4053-5-3A | 97928 | HUCK INTL INC | | HT4053-5-3A | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | HT4053-5-3A | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M740-5-3 | 76301 | THE BOEING COMPANY | | ST3M740-5L3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|