|
|
|
National Stock Number:
5305-01-166-5722
Federal Supply Class:
5305
National Item Identification Number:
011665722
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 11462570 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 11462570 | 64609 | BANNER MACHINE COMPANY, INC. |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.392 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.562 INCHES NOMINAL | | ASKEWED HEAD ANGLE | 90.0 DEGREES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 0.562 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.120 INCHES NOMINAL | | HEAD DIAMETER | 0.314 INCHES NOMINAL | | HEAD HEIGHT | 0.115 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-761 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | POINT STYLE | FLAT | | SECOND DIAMETER FROM HEAD | 0.164 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD LENGTH | 0.170 INCHES NOMINAL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|