|
|
National Stock Number: 5305-01-166-4526
Federal Supply Class: 5305
National Item Identification Number: 011664526
Description: SCREW,EXTERNALLY RELIEVED BODY
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
32242-1 | 09344 | ROCKWELL COLLINS, INC. DBA RC DISPLAYS SYSTEMS |
|
Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.235 INCHES NOMINAL | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | FASTENER LENGTH | 0.375 INCHES NOMINAL | FIRST DIAMETER FROM HEAD | 0.099 INCHES MINIMUM AND 0.104 INCHES MAXIMUM | HEAD DIAMETER | 0.442 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | MATERIAL | STEEL CORROSION RESISTING OVERALL | NOMINAL THREAD DIAMETER | 0.250 INCHES | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | OXIDE OVERALL | THREAD LENGTH | 0.140 INCHES NOMINAL | THREAD DIRECTION | RIGHT-HAND | THREAD SERIES DESIGNATOR | UNF |
|
|