5305-01-166-4417, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-166-4417

Federal Supply Class:
5305

National Item Identification Number:
011664417

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

5305PL0783938	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
NAS1578A4R9	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.950 INCHES MINIMUM AND 0.980 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIAL FEATURES	INTERNAL DRIVE RIBBED
SPECIFICATION/STANDARD DATA	80205-NAS1578 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial