5305-01-162-2363, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-162-2363

Federal Supply Class:
5305

National Item Identification Number:
011622363

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

5189111-001	53711	NAVAL SEA SYSTEMS COMMAND
FCRT 7900L-8-B-4	17446	HUCK INTERNATIONAL, INC
FCRT 7900L-8-B-4	97928	HUCK INTL INC

Techincal Specification:

FASTENER LENGTH	0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM
HEAD HEIGHT	0.076 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
HEAD DIAMETER	0.299 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	SLOT
MATERIAL ACCOMMODATED THICKNESS	0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	IRON ALLOY 660 FASTENER
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT	ANODIZE STAND-OFF
SURFACE TREATMENT	PASSIVATE FASTENER
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE SECONDARY WASHER
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial