|
|
|
National Stock Number:
5305-01-159-8543
Federal Supply Class:
5305
National Item Identification Number:
011598543
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 904E180 ITEM 54 | 94259 | BECHTEL MARINE PROPULSION CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | ZZZY | | FASTENER LENGTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD DIAMETER | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM | | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | HEAD STYLE | PAN | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION | | SCREW MATERIAL | COPPER ALLOY | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.180 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNC |
|
|