|
|
|
National Stock Number:
5305-01-158-6770
Federal Supply Class:
5305
National Item Identification Number:
011586770
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT4057-4-16 | 17446 | HUCK INTERNATIONAL, INC | | HT4057-4-16 | 73197 | HI-SHEAR CORPORATION | | HT4057-4-16 | 80539 | SPS TECHNOLOGIES, LLC | | HT4057-4-16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4057-4-16 | 97928 | HUCK INTL INC | | HT4057-4-16A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4057-4-16A | 0PTK6 | SPS TECHNOLOGIES INC | | HT4057-4-16A | 17446 | HUCK INTERNATIONAL, INC | | HT4057-4-16A | 56878 | SPS TECHNOLOGIES, LLC | | HT4057-4-16A | 73197 | HI-SHEAR CORPORATION | | HT4057-4-16A | 80539 | SPS TECHNOLOGIES, LLC | | HT4057-4-16A | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | HT4057-4-16A | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M733-4-16 | 76301 | THE BOEING COMPANY | | ST3M733-4L-16 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M733-4L16 | 007R1 | TWIST TITE MFG, INC | | ST3M733-4L16 | 76301 | THE BOEING COMPANY | | WC4057-4-16 | 60516 | WEST COAST AEROSPACE, INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.454 INCHES MINIMUM AND 1.484 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | HEAD DIAMETER | 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112 TYPE C FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|