|
|
|
National Stock Number:
5305-01-068-5505
Federal Supply Class:
5305
National Item Identification Number:
010685505
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 5305PL0682237 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51099-140 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N24AP33036 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| FASTENER LENGTH | 2.188 INCHES MINIMUM AND 2.250 INCHES MAXIMUM | | HARDNESS RATING | 235.0 BRINELL STANDARD MAXIMUM OVERALL | | HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 410 OR STEEL COMP 416 OR STEEL COMP 430 OVERALL | | MINIMUM TENSILE STRENGTH | 70000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 40000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE | | WIDTH BETWEEN FLATS | 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.727 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 11 |
|
|