5305-01-067-7000, SCREW,EXTERNALLY RELIEVED BODY

5305-01-067-6999 SCREW,EXTERNALLY RELIEVED BODY

5305-01-067-7001 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-067-7000

Federal Supply Class:
5305

National Item Identification Number:
010677000

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

3370C06H03

04804

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	1.162 INCHES MINIMUM AND 1.182 INCHES MAXIMUM
CRITICALITY CODE JUSTIFICATION	ZZZY
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.800 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD DIAMETER	0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
HEAD HEIGHT	0.675 INCHES MINIMUM AND 0.705 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.375 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	16

Click here to Register for Free 30-day Trial