|
|
|
National Stock Number:
5305-01-065-7118
Federal Supply Class:
5305
National Item Identification Number:
010657118
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| SM-C-775486-5 | 11447 | L3 TECHNOLOGIES, INC. | | SM-C-775486-5 | 49671 | LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES | | SM-C-775486-5 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.740 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.160 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.140 INCHES NOMINAL | | HEAD HEIGHT | 0.160 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.375 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.380 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|