|
|
|
National Stock Number:
5305-01-058-8429
Federal Supply Class:
5305
National Item Identification Number:
010588429
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30AB-P10-55A | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 3.672 INCHES MINIMUM AND 3.704 INCHES MAXIMUM | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 1.162 INCHES MINIMUM AND 1.281 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.600 INCHES MINIMUM AND 0.652 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNF |
|
|