5305-01-058-7070, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-058-7070

Federal Supply Class:
5305

National Item Identification Number:
010587070

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

AS169-3-12	84256	AVIBANK MFG., INC.
CA2658-3-12	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
MS3369B312	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS3369B312	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.049 INCHES MINIMUM AND 1.053 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.122 INCHES MINIMUM AND 1.142 INCHES MAXIMUM
GRIP DIAMETER	0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH	0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
HEAD HEIGHT	0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE	CROWNED HEXAGON
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	90000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	REATAINING ELEMENT IN SHANK
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.262 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial