|
|
|
National Stock Number:
5305-01-039-7252
Federal Supply Class:
5305
National Item Identification Number:
010397252
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| A100344-18 | 72181 | INTEGRA TECHNOLOGIES CORP | | A748 | 72181 | INTEGRA TECHNOLOGIES CORP |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.032 INCHES MINIMUM AND 0.037 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.344 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM | | HEAD HEIGHT | 0.875 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.875 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 24 |
|
|