5305-01-036-5539 SCREW,CAP,SOCKET HEAD Index 5306-01-036-5542 BOLT,CLOSE TOLERANCE

National Stock Number:
5305-01-036-5540

Federal Supply Class:
5305

National Item Identification Number:
010365540

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.


Manufacturer Information:
FF-S-8581348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS51109-696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NASM5110980205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.600 INCHES MINIMUM AND 0.651 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONFF-S-85,GR 8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNC


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us