5305-01-031-5084, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-031-5084

Federal Supply Class:
5305

National Item Identification Number:
010315084

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

243330-000

81413

BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.250 INCHES NOMINAL
COUNTERSINK ANGLE	81.0 DEGREES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.407 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.070 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
HEAD DIAMETER	0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL	STEEL COMP 304L OR STEEL COMP 316L OR STEEL COMP 302 OR STEEL COMP 347 OR STEEL COMP 321 OR STEEL COMP 317 OR STEEL COMP 316 OR STEEL COMP 310 OR STEEL COMP 309 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 301 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303SE OR STEEL COMP 308 OR STEEL COMP 309S OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 348 OR STEEL COMP 385 OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD LENGTH	0.187 INCHES MINIMUM AND 0.207 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	40

Click here to Register for Free 30-day Trial