|
|
|
National Stock Number:
5305-01-027-9525
Federal Supply Class:
5305
National Item Identification Number:
010279525
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| LS15237-5-2 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LS15237-5-2 | 72914 | GRIMES AEROSPACE COMPANY | | LS15237-5-2 | 73197 | HI-SHEAR CORPORATION | | LS15237-5-2 | 80539 | SPS TECHNOLOGIES, LLC | | LS15237-5-2 | 89513 | GRIMES AEROSPACE CO | | LS15237-5-2 | 98897 | LOCKHEED MARTIN CORP | | LS15237-5-2 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE | | MATERIAL | STEEL COMP 4340 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|